The soldering robot originated in Japan and was first used in electroacoustic and automotive electronics after entering the country. Only 05 soldering robots from Japan were available on the market 05 years ago. In 2006, the domestic soldering robot interview, after which many domestic automation manufacturers have invested in this industry. At present, there is a market situation in which domestic soldering robots represented by domestic brands coexist with several Japanese brand soldering robots. This article refers to the address: http:// Automatic soldering machine, also known as soldering robot, is used in soldering station, which is different from wave soldering, reflow soldering, etc. It is mainly used to replace simple and repetitive manual soldering equipment. At present, the market is mainly for the gantry robot type, and the vertical multi-joint robot movement type can be seen abroad. For the replacement of manual welding stations, the currently available automatic equipment on the market includes selective wave soldering and soldering robots. Selective wave soldering is a special type of wave soldering. It is mainly used for through-hole components and selectively sets solder joints to meet production requirements. The characteristics of selective wave soldering determine the precision of the equipment requirements, so there are only a few options available on the market that are truly stable and available, and they are expensive. Soldering robots work in the opposite way to selective wave soldering. For through-hole inserts, after fixing the product with the fixture, the pins are up and soldered from above. The soldering robot can only complete the automatic soldering action. It needs manual operation of the machine and equipped with a fixture. By pre-programming the parameters, manually place the product into the fixture, place the fixture to the machine, and then start the machine. The automatic soldering robot operates according to the set program and completes the welding work. Then, the welded product is manually removed, the installed unwelded product is repositioned, and the machine is started for welding. Repeatedly. So strictly speaking, the soldering robot is a semi-automatic device, and it still has a lot of gaps from ROBOT. The operation of the soldering robot determines the biggest advantage of the welding products with consistent solder joints and good quality stability. At the same time, for many products, the efficiency of one person operating a single device can reach the multi-person efficiency of manual welding, and has the advantage of improving efficiency. However, for some complex, unfixed products, the efficiency improvement is not obvious. The emergence of automatic soldering machine solves many process problems for manual soldering, once again proves that market demand will definitely drive the market development. The soldering machine equipment industry is a new industry. The technology needs to be further precipitated and continuously updated, and its development momentum is bound to be good.
Each
zone within a tunnel has its own requirements in terms of lighting design and
performance. For example, tunnel entrances require high levels of light with
little or no luminaire spacing.
LED Tunnel Light,Tunnel Light,LED Tunnel Light Fixture,LED Tunnel Light Design Shenzhen Ri Yue Guang Hua Technology Co., Ltd. , https://www.ledlightinside.com