6 elements required for LED street lights

LED displays are appearing more and more in people's field of vision. LED lighting has also been tested on some main roads with LED street lights. What conditions do LED street lights need?

(1) Energy saving has the characteristics of low voltage, low current and high brightness. LED lamps used as LED street lamps must have low voltage, low current and high brightness to ensure normal use during installation and high efficiency.

(2) New green environmental protection light source, LED uses cold light source, glare, small radiation, no harmful substances in use. LED environmental protection benefits are better, there is no ultraviolet and infrared rays in the spectrum, and the waste can be recycled. It is free of mercury and has no pollution and can be safely touched. It is a typical green illumination source.

(3) Long life. Because LED street lamps need to be used continuously, it is also troublesome to replace them when they are replaced. Therefore, when choosing, long life is also an important factor. The basic life of LED lighting lamps produced by Shuguang Display is 50,000 hours. Above, this condition is fully met.

(4) The structure of the lamp is reasonable. LED luminaires will completely change the structure of the luminaire. According to different requirements, the structure of the LED luminaire will increase the brightness after the initial brightness, and the illuminance will be improved after the optical lens is improved. The LED is a solid-state light source encapsulated with epoxy resin. The structure has no fragile components such as a glass bulb and is an all-solid structure, so it can withstand shock shock without being damaged.

(5) Light color is simple, and there are many light colors. The LED street light used as a street light must be light-colored and simple, and does not require too much noise. It is also necessary to ensure road safety while ensuring the brightness of the illumination.

(6) High security. The LED light source is driven by low voltage, the light is stable, no pollution, no stroboscopic phenomenon when using 50Hz AC power supply, no ultraviolet B band, the color rendering index Ra is close to 100, the color temperature is 5000K, and the closest to the sun color temperature is 5500K. It is a cold light source with low heat and no heat radiation and can precisely control the light type and illumination angle. The light color is soft and glare-free; and it does not contain substances such as mercury and sodium which may harm LED street lamps.

Electric Spiral Stove

Electric Spiral Stove,Cooking Plate Stove,Electric Cook Stove,Spiral Hot Plate Electric Stove

Shaoxing Haoda Electrical Appliance Co.,Ltd , https://www.zjhaoda.com